Quantcast
Channel: Motorcycles Repair Manual Download and Reviews » Search Results » 2002 kawasaki 360 prairie diagram
Browsing all 10 articles
Browse latest View live

1999-2002 Kawasaki ZX6R Engine Protection Cage installation instructions

download 1. Follow installation instructions for extended frame sliders. (See page 1) Note: Do not attach delron tips or tighten extended frame sliders until all components are installed. 2. Place the...

View Article



2001-2002 GL1800 A ABS Speed Sensor Wire Clamp Location INSPECTION/ REPAIR...

download 1. If the VIN is within the preceeding range, inspect the front ABS speed sensor wire clamp according to the following illustrations. 2001-2002 GL1800A ABS Speed Sensor Wire Clamp Location...

View Article

Kawasaki KVF 360 Winch Mount Installation Manual

download 1. Remove the bottom and middle bumper mounting bolts. 2. Pull the front bumper outwards while sliding the winch mount behind the bumper with the roller fairlead mount tabs facing downward and...

View Article

Kawasaki Prairie 650 Snorkel REMOVAL AND INSTALLATION

download Remove plastic from around air filter housing. Remove air filter housing lid and air filter. Remove 8 small screws from bottom of air box. Next, remove bolt from front and rear of air box....

View Article

KAWASAKI 400 PRAIRIE ATV WINCH MOUNT INSTALLATION ISTRUCTIONS

download 1. Place the mounting plate into position on the front bumper tube assembly and attach with the four ¼- 20 u-bolts, hex nuts, and lock washers. See the illustration below for detail. 2. Place...

View Article


Kawasaki Exhausts – ZX-6 ZX-10 Zx-14 Exhaust – Slip-ons INSTALLATION MANUAL

download Our favorite exhaust options for Kawasaki ZX Ninjas – ZX-10,ZX-6r, and the new horsepower king, Zx-14.. Grab your horsepower today. We love Rob Muzzy and Muzzy Exhausts.Going back to Doug...

View Article

Kawasaki Ninja 650R (ER-6F) & ER-6N Resource Upgrading the Suspension on the...

download Top fork is as removed. Kawasaki Ninja 650R (ER-6F) & ER-6N Resource Before removing the fork from the clamps on the yokes I loosened the fork top. Before removing the fork top the...

View Article

2002 Kawasaki 360 ATV WINCH ACCESSORY INSTALLATION INSTRUCTIONS

download 1. Remove the two 8mm bolts that attach the front bumper assembly to the ATV frame see figure 3. 2. Place Winch mounting plate (A1) into position and fasten the two bent down tabs to the ATV...

View Article


Kawasaki 650/360 Prairie Lift Kit Installation and removal Instructions

download 1) Place jack under center of ATV front end and lift until front wheels clear the ground. Be careful to support ATV properly so that it is securely supported but so that A-arms and shocks can...

View Article


Kawasaki Prairie 360,650,700 ATV PLOW Plow Mounting Kit INSTALLATION...

download Mount Installation Note: There are different hole locations on the plow mount depending on the bike model. For Prairie 360 use the middle hole locations (B), for Prairie 650 and Twin Peaks 700...

View Article
Browsing all 10 articles
Browse latest View live




Latest Images